Luth AR MBA-4 Carbine Stock Black

SKU: 862388000153 Manufactured by: Luth AR

$65.75

  • Light weight stock to mount to a carbine rifle  (6-positions mil-spec or commercial tube) This is the carbine skullaton stock)
  • Fits all .223 and most .308 AR carbine style rifles
  • Super Strong Glass Filled Nylon
  • 21st century look
  • Ergonomic
  • Easy to replace and quick to install
  • Uses 4 out of the 6 positions on a mil-spec or commercial tube

Description

Product Description

  • Light weight stock to mount to a carbine rifle  (6-positions mil-spec or commercial tube) This is the carbine skullaton stock)
  • Fits all .223 and most .308 AR carbine style rifles
  • Super Strong Glass Filled Nylon
  • 21st century look
  • Ergonomic
  • Easy to replace and quick to install
  • Uses 4 out of the 6 positions on a mil-spec or commercial tube

Features

  • Available in Black or Flat Dark Earth
  • Lightweight buttstock for the carbine AR, weighing in at 9.5 ounces
  • Easy to add our Cheek Piece: Cheek piece will add an additional 1″ height on cheek rest
  • Easy to add our Butt Plate Assembly or 3-Axis Butt Plate Assembly: The assemblies will add an additional 1 1/16″ length of pull with extended length buttplate
  • Adapts To Existing Commercial and Mil-Spec Buffer Tubes
  • Certain after Market Commercial Buffer Tubes that exceed 1.172″diameter may not fit
  • Caution: the MBA-3 and MBA-4 Carbine buttstocks are not designed to be used with Large Bore Calibers such as .338 Lapua or .50 BMG applications. 
  • The MBA-4 Carbine buttstock is NOT interchangeable with A2 standard buffer tube. You will need to purchase a MBA-1 or MBA-2 Rifle buttstock to fit A2 tubes

Features

  • Picatinny Rail
  • Revolutionary Anti-Rattle Set Screw

Compatible Buffer Assemblies:

  • .223 Mil-Spec Carbine Buffer Assembly
  • .223 Commercial Carbine Buffer Assembly
  • .308Mil-Spec Carbine Buffer Assembly
  • .308 Commercial Carbine Buffer Assembly

Additional Information

The MBA-4 does not include the following accessories, they can be purchased on our website separately in the Accessories section:

  • Sling Swivels
  • Carbine Buffer tube
  • Carbine Buffer Body
  • Carbine Spring
  • Latch Plate
  • Lock Ring

Caution: the MBA-3 and MBA-4 Carbine buttstocks are not designed to be used with Large Bore Calibers such as .338 Lapua or .50 BMG applications. See our MBA-1 and MBA-2 Rifle buttstocks as alternatives.

Installation Notes: 

  • When tightening the anti-rattle set screw, be careful not to over tighten as the threaded insert may separate from the plastic stock body
  • When sliding the buttstock onto a 6-position buffer tube, the lock pin has a notch in the head of the lock pin that must line up with a tab on the stock body. Once the slot and tab are lined up, the pin can be fully retracted allowing the buttstock to slide onto the tube. The MBA-4 should slide easily without resistance. If there is any resistance, the lock pin is not fully retracted.

Additional information

Weight 2.0 lbs

Reviews

There are no reviews yet.

Be the first to review “Luth AR MBA-4 Carbine Stock Black”

Your email address will not be published. Required fields are marked *